Workspaces and templates

 
VibroMatrix allows to operate single instruments or combinations of different instruments. These instruments can be configured and placed on the screen individually. This way, you can adapt VibroMatrix to every measurement task optimally.
To be able to use a configuration again for the same or similar measurement tasks, you can save it as workspace. A workspace contains information about all opened instruments, their configuration and the configuration of the InnoMaster.
Templates are working in a similar way. But they contain a more general description of a workspace and thus can be used in a more flexible way.
For instance, the serial numbers of the InnoBeamers in use are saved in a workspace. So if you open a workspace again, exactly the same measuring channels will be used even if you are working with more devices now. In contrast, templates only contain general information about the used devices. By means of templates, you can exchange configurations with measurement teams that use other PCs and InnoBeamers with different serial numbers. It is also possible to start an InnoMaster Trainer without using measurement hardware, configure a template there and use it in the InnoMaster RT with real measurement hardware.
Workspaces and templates
1

Pushbutton Open workspace

 
1. Pushbutton Open workspace
By clicking on this button, you open a window for selecting a workspace or a template to be loaded.
2

Pushbutton Save workspace

 
2. Pushbutton Save workspace
By clicking on this button, you save your current configuration with the name of the currently used workspace.
However, a confirmation request will open to avoid accidental overwriting.
3

Pushbutton Save workspace as...

 
3. Pushbutton Save workspace as...
By clicking on this button, you open a window for saving workspaces and templates.
You can enter a new file name.
4

Pushbutton Delete workspace

 
4. Pushbutton Delete workspace
By clicking on this button, you open a window for selecting a workspace or template to be deleted.
5

Currently used workspace

 
5. Currently used workspace
This field shows the currently used workspace.
6

Prefer use of templates

 
6. Prefer use of templates
If a saved workspace shall be used with several InnoBeamers, the use of templates may be prefered. A template is then used but no new workspace is created.
7

Load last workspace

 
7. Load last workspace
If you activate this option, VibroMatrix will open the workspace that was in use the last time the InnoMaster was closed when starting the InnoMaster again.
8

Ask for saving of working place when closing

 
8. Ask for saving of working place when closing
Each time VibroMatrix is closed an option appears to save the current workspace. Thereby, it shall be prevented to discard selected settings by accident.