Signal

 
Signal
1

Channel

 
1. Channel
All settings can be entered independently for each channel. For example, you may use different filters. The number of tabs depends on the number of active channels.
More settings are available when right-clicking on the channel. Thereby its colour in the diagram can be adjusted (Change colour) or its settings can be transferred to other channels (Copy settings to other channels).
2

Signal input

 
2. Signal input
Selects the physical input and the gain of the USB device InnoBeamer.
3

Filter

 
Settings for selection of filter an measurands.
4

Rotation source

 
4. Rotation source
Selects the signal source for rotation speed measurements at all channels.
5

Speed factor

 
5. Speed factor
Enter transmission ratio if the speed can be determined only indirectly (e.g. measured at a reduced spindle).