Signal

 
Signal
1

Channels

 
1. Channels
All settings can be entered independently for each channel. For example, you may use different filters. The number of tabs depends on the number of active channels.
More settings are available when right-clicking on the channel. Thereby its colour in the diagram can be adjusted (Change colour) or its settings can be transferred to other channels (Copy settings to other channels).
2

Signal input

 
2. Signal input
Selects the physical input and the gain of the USB device InnoBeamer.
3

Measurand and unit

 
3. Measurand and unit
 
The connected sensor determines the available options. Velocity and displacement are calculated from acceleration by integration (InnoAnalyzer Pro only).
The unit should be selected in a way that the measuring value does not drop below 0.001 permanently.
4

Characteristic

 
4. Characteristic
 
The following characteristics are available:
Peak value
The hight of the FFT line represents the amplitude of the corresponding sinusoidal signal.
True r.m.s. value
The hight of the FFT line represents the true r.m.s. value of the corresponding sinusoidal signal.
Peak-to-peak value
The hight of the FFT line represents the peak-to-peak amplitude of the corresponding sinusoidal signal.