Measurement mode

 
On the left side of this window you find a selection tree with the different measuring modes. The right section shows some detailed settings.
 
Measurement mode
1

Measuring method

 
1. Measuring method
Shows the selected mode.
2

Guide values

 
2. Guide values
These are the limit values to DIN 4150-3 for the selected mode.
3

Set own limits

 
3. Set own limits
Here you may enter non-standard limits if desired.
4

Aimed measuring time

 
4. Aimed measuring time
 
The measuring time can be limited to switch off the instrument automatically after measurement.
5

Start delay

 
5. Start delay
 
The time delay between pressing Start and the beginning of the actual measurement can be used to suppress signal settling effects.