InnoMaster RT®

 
For real-time measurement and additional recording of raw data, you start the InnoMaster RT.
InnoMaster RT®
1

Minimize

 
1. Minimize This button minimizes the window into the tray of Windows.
2

Close

 
2. Close This button closes the InnoMaster and all instruments.
3

Measuring chain

 
3. Measuring chain
 
All elements of the measuring chain are administrated in the upper area.
They are sorted in order of the natural signal flow, which starts with the sensors and ends
with the instruments or the optional annunciators.
 
4

Expand/collapse control panels

 
4. Expand/collapse control panels
 
This button switches the view of the control panels.
5

CPU load

 
5. CPU load
 
VibroMatrix works in the so-called streaming mode. That means, from the moment you start the instruments until you stop them, sensor signals are acquired without interuption and with high sample rate. They are displayed in the instruments immediately. Not a single value gets lost.
 
The CPU load shows how fast VibroMatrix can solve this tasks with regard to the computing time assigned by the computer. Values below 100% mean that VibroMatrix can carry out all tasks. Values above 100% signal an overload: The computer cannot carry out real-time measurement. In this case, the following measures can put things right:
  •  Closing instruments
  •  Reducing the number of channels in the instruments (example)
  •  Reducing the refresh rate
6

Start/stop all instruments

 
6. Start/stop all instruments
 
Instruments can be started and stopped separately or centrally in the InnoMaster.
7

Start/stop all annunciators

 
7. Start/stop all annunciators
 
This button starts/stops all annunciators centrally.