Display of traces

Display of traces
1

Fine grid

 
1. Fine grid
Activates display of the grid.
2

Grid density

 
2. Grid density
Activates grid lines at all graduation marks of the Y-axis.
3

Permanent autoscaling

 
3. Permanent autoscaling
If activated, the InnoAnalyzer 3D will rescale Y-axes eacht time the measurement chart is refreshed.
4

Log Amplitude

 
4. Log Amplitude
Activates the logarithmic display of the y-axis.
5

Axis height

 
5. Axis height
The height of the diagram can be adjusted by entering values between 20% and 100%.
6

Shift curves

 
6. Shift curves
Shifts all traces together into the desired direction.
7

Synchronize 2D display

 
7. Synchronize 2D display
Activates synchronization with 2D display of the frequency analysis. Switch into 2D display by clicking on the button .
8

Fill out

 
8. Fill out
To improve visibility several elements of the measurement chart can be displayed filled. Curve, Side wall, Floor and Back wall can be selceted.
9

Compress / Spread curves (X)

 
9. Compress / Spread curves (X)
Compresses or spreads the measurement curve in its frequency extension.
10

Compress / Spread curves (Y)

 
10. Compress / Spread curves (Y)
Compresses or spreads the measurement curve of all traces in y direction.