Display area

 
This section shows the most important status and signal data.
 
Display area
1

Diagram

 
1. Diagram
 
In the oscilloscope mode the diagram shows the vibration signal versus time. There is one trace per channel. Each one has its y axis which can be independently scaled and shifted.
Scaling is done with the buttons and . Click the arrows to shift the axis.
The time axis can be scaled and shifted directly by the mouse pointer. Hold the left mouse button to shift and the right button to zoom. 
2

Status bars

 
2. Status bars
 
The status bars show the most important channel settings:
  • sensor
  • measuring channel
  • measured quantity
  • gain setting
  • underload
  • overload
3

Open settings

 
3. Open settings 
Opens and closes the setup menu.
4

Clone

 
4. Clone
 
Opens a new window with the same settings which can be modified.
5

Copy / Save

 
5. Copy / Save
Copies the diagram data into the clipboard or saves it on hard disk. Different file formats can be chosen.
6

Channels

 
6. Channels
 
Increase or decrease the number of measuring channels (and curves). One to four channels are possible.
7

Start/Stop

 
7. Start/Stop    Starts and stops measurement.