Display area

Display area
1

Minimize

1. Minimize
This button minimizes the Calibrator.
2

Close

2. Close
This button closes the Calibrator.
3

Upper status bar

3. Upper status bar
Shows the connected sensor and input channel.
4

Display of measured sensitivity

4. Display of measured sensitivity
The measured sensitivity is always displayed in mV/m/s². The display is updated 1..4 times a second.
5

Lower status bar

5. Lower status bar
Shows
6

Save

6. Save This button saves the currently measured sensor sensitivity in the sensor database.
7

Exciting quality

7. Exciting quality
The exciting quality of the mechanical reference signal is monitored during calibration using the sensor to be calibrated so that the calibration is performed correctly. Exciting quality is defined as the absence of frequencies next to the calibration signal. The purer the sinusoidal signal supplied by the vibration calibrator, the higher the exciting quality. It is displayed numerically and a a bar chart.
8

Collapse/expand control panel

8. Collapse/expand control panel
Opens and closes the setup menu.
9

Start/Stop

9. Start/Stop
Starts and stops measurement.