Configuration options for the measurement mode

 
Configuration options for the measurement mode
1

Measurement mode details

 
1. Measurement mode details
For greater certainty concerning the selected measurement mode, the following details are displayed:
  •  evaluation type
  •  weighting filters for the different axes
  •  evaluation zones
2

Aimed measuring time

 
2. Aimed measuring time   The measurement is usually carried out for a limited time.
This duration can be entered here. However, it must not be below a certain minimum duration. By means of the ISO button, the minimum duration conforming to the standard is entered.
3

ISO button

 
3. ISO button   By clicking the ISO button, the minimum measurement duration conforming to the standard is entered as aimed measuring time.
 
4

Delay to start

 
4. Delay to start
If you do not want the measurement to start right after pushing the start button, you can enter a delay here.