Annunciator management

Many instruments of VibroMatrix can signal information outward optionally by means of annunciators. Here, in the annunciator management, you create the annunciators. Afterwards, they are available in the instruments. Annunciators are additional ways to communicate information:
Annunciator management

Selection tree

1. Selection tree
The selection tree shows all available types of annunciators and the created annunciators for each type. The traffic light on the left side of the annunciator's name is an activity indicator:
  •  red:
This annunciator is not connected to an instrument.
  •  yellow:
This annunciator is connected to an instrument, but the respective instrument has not yet been started.
  •  green:
This annunciator is connected to an instrument and the respective instrument has been started.
If there are missing general pre-conditions for operating an annunciator type (e.g. a disconnected radio control unit for operation of radio switches), the respective annunciators are marked as follows:
Mouse operation


2. Filter
You can restrict the list of annunciators, e.g. to annunciators which are currently connected (yellow or green activity indicator).


3. Close     This button closes the window.