InnoLogger®

Application

For the monitoring of vibration parameters and their logging for later analysis, the InnoLoggers are available.

Rotating parts in drives, gears, pumps, fans and many other technical products cause perturbing vibrations. Impulse-like loads, e.g. from a vibratory pile driver in the construction-field, generate problems as well.

In numerous vibration standards - work-specific, national or even international, significant vibration parameters are defined for a reliable evaluation of the vibration situation.

The InnoLoggers measure these vibration parameters and monitor their level regarding the exceeding of limits.

Alarming situations are signaled and allow a fast pass-fail-recognition because of colored bars. In addition, the alarm can initiate the logging of vibration parameters. This data can be used for further analysis.

Properties

The InnoLoggers in Standard and in Pro Version are both universal monitoring and logging instruments for vibration parameters. The Pro Version additionally includes two integrators and is consequently able to process not only vibration acceleration, but also vibration velocity and displacement.

The following settings are possible:

• Free filter adjustment 0.3 .. 2000 Hz
• Up to 26 units, metric and imperial
• Up to 6 parameters
  
• 2 limits for alarm, alarm delay, alarm combination
• 3 modes selectable for the choice of the logging speed (Sum values; single values - maximum logging speed, single values - adaptive logging speed)

A highlight is the adaptive logging-speed: The data is reduced here but still the InnoLogger allows a post processing of digital data without any restrictions. Data logging is carried out optionally binary or as text.
 
The clone function makes it possible to operate several InnoLoggers on one channel at the same time, although only one instrument was bought.