VibroMatrix - Sensors on the PC with the InnoBeamer

Application

The InnoBeamer makes digital real-time vibration measurement easy! It is automatically recognized by the PC and digitizes the sensor signals for the VibroMatrix measurement system. Transferring the sensor signals to the PC is carried out without loss as a permanent data stream.

The InnoBeamer is supplied by PC’s USB host interface and on its part supplies the connected sensors. External power supply is not required, field measurement by means of a notebook is possible without any problems.

The InnoBeamer supports synchroneous data acquisition beyond device’s borders. This way, devices can flexibly work alone or be combined to multichannel-systems.

Sensors with intergrated data sheet (TEDS) are automatically recognized by the InnoBeamer. All required sensor data is read electronically, operating errors are avoided.

The InnoBeamer is a high-precision measuring instrument in a small format.

Properties

• Inputs for 2 sensors with IEPE interface as well as 1 r.p.m. sensor
• Supports intelligent sensors with TEDS 
• Supply of all sensors
• Data transfer  to PC by USB
• Supplied by USB interface of PC
• 4 decade input ranges
• 24 Bit analog-digital-conversion
• Synchroneous measurement with several devices
• Cases can be interlinked by means of connectors
• For signals from 0.1 to 40 000 Hz (InnoBeamer X2) resp. from 0.1 to 3200 Hz (InnoBeamer LX2)