Standards

The following table shows you a compilation of standards related to vibration measurement.

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI

Number/Source	Title
ANSI S2.1	Vibration and Shock - Vocabulary
ANSI S2.2	Methods for the Calibration of Shock and Vibration Pickups
ANSI S2.4	Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements
ANSI S2.7	Balancing Terminology
ANSI S2.13	Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Part 1: General Guidelines
ANSI S2.16	Vibration Noise Measurements and Acceptance Criteria of Shipboard Equipment
ANSI S2.17	Machinery Vibration Measurement
ANSI S2.19	Mechanical Vibration - Balance Quality Requirements of Rigid Rotors Part 1: Determination of Permissible Residual Unbalance
ANSI S2.25	Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships
ANSI S2.26	Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment
ANSI S2.28	Guide for the Measurement and Evaluation of Vibration of Shipboard Machinery
ANSI S2.29	Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery
ANSI S2.40	Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Instruments for Measuring Vibration Severity
ANSI S2.41	Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 rev/s - Measurement and Evaluation of Mechanical Vibration Severity in situ
ANSI S2.42	Procedures for Balancing of Flexible Rotors
ANSI S2.43	Criteria for Evaluating Flexible Rotor Balance
ANSI S2.45	Electrodynamic Test Equipment for Generating Vibration - Method of Describing Equipment Characteristics
ANSI S2.46	Characteristics to be Specified for Seismic Transducers
ANSI S2.47	Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings
ANSI S2.48	Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics
ANSI S2.58	Auxiliary Tables for Vibration Generators - Methods of Describing Equipment Characteristics
ANSI S2.61	Guide to the Mechanical Mounting of Accelerometers
ANSI S3.18	Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration (ISO 2631)
ANSI S3.29	Guide to the Evaluation of Human Exposure to Vibration in Buildings
ANSI S3.32	Mechanical Vibration and Shock Affecting Man - Vocabulary
ANSI S3.34	Human Exposure to Vibration Transmitted to the Hand, Guide for Measurement and Evaluation of
ANSI S3.40	Mechanical Vibration and Shock - Hand-Arm Vibration - Method for the Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (ISO 10819)
ANSI S12.11	Acoustics - Measurement of noise and vibration of small air-moving devices - Part 2: Structure-borne vibration
ANSI/AGMA 6000-B96	Specification for Measurement of Linear Vibration on Gear Units
ANSI/ASHRAE 87.1	Method of Testing Fan Vibration--Blade Vibrations and Critical Speeds
ANSI/ASHRAE 87.3	Methods of Testing Propeller Fan Vibration----Diagnostic Test Methods
ARI 530-95	Method of Rating Sound and Vibration of Refrigerant Compressors

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

AS 1359.114	Rotating electrical machines - General requirements - Vibration measurements and limits (IEC 34-14)
AS 1807.17	Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Part 17: Determination of vibration in cleanrooms
AS 1807.18	Part 18: Determination of vibration in workstations, safety cabinets and pharmaceutical isolators
AS 2362.15	Fire detection, warning, control and intercom systems - Methods of test - Vibration test
AS 2400.10	Packaging - Protection against shock and vibration (cushioning)
AS 2582.6	Complete, filled transport packages - Methods of test Part 6: Vibration test at fixed low frequency
AS 2582.11	Part 11: Sinusoidal vibration tests using a variable frequency
AS 2606	Vibration and shock - Vocabulary (ISO 2041)
AS 2625.1	Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816) Part 1: General guidelines
AS 2625.4	Part 4: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
AS 2641	Vibration and shock - Balancing - Vocabulary (ISO 1925)
AS 2670.1	Evaluation of human exposure to whole-body vibration (ISO 2631) Part 1: General requirements
AS 2670.2	Part 2: Continuous and shock-induced vibration in buildings (1 to 80 Hz)
AS 2670.4	Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
AS 2763	Vibration and shock - Hand-transmitted vibration - Guidelines for measurement and assessment of human exposure
AS 2775	Mechanical vibration and shock - Mechanical mounting of accelerometers (ISO 5348)
AS 2955	Earth-moving machinery - Tests and measurements - Operator seat - Transmitted vibration
AS 2973	Vibration and shock - Human response vibration-measuring instrumentation
AS 2993	Vibration and shock - Dynamic characteristics of the human body - Driving point impedance of the human body
AS 3658	Vibration and shock - Mechanical vibration and shock affecting humans - Vocabulary (ISO 5805)
AS 3709	Vibration and shock - Balance quality of rotating rigid bodies (ISO 1940-1)
AS 3721	Vibration and shock - Balancing machines - Description and evaluation (ISO 2953)
AS 3728	Vibration and shock - Resilient shaft couplings - Information to be supplied by users and manufacturers
AS 3762	Measurement and reporting of local vibration data of ship structures and equipment (ISO 4868)
AS 3763	Mechanical vibration and shock - Guidelines for the overall evaluation of vibration in merchant ships (ISO 6954)
AS 3764	The measurement and reporting of shipboard vibration data (ISO 4867)
AS 4594.5	Internal combustion engines - Performance - Engines for land, rail-traction and marine use - Torsional vibrations (ISO 3046)
ASTM D999-01	Standard Methods for Vibration Testing of Shipping Containers
ASTM D3580-95	Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
ASTM D4728-01	Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D5112-98	Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D6874-03	Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

BS 848-7	Fans for general purposes. Specifications for balancing and vibration (ISO 14694)
BS 848-10	Fans for general purposes. Performance testing of jet fans (ISO 13350)
BS 2011-2	Environmental testing. Tests. Test Fda. Random vibration - wide band reproducibility high
BS 2782	Methods of testing plastics (ISO 6721)
BS 3015	Glossary of terms relating to mechanical vibration and shock (ISO 2041)
BS 3375	Management services. Guide to determination of exposure limits, recovery times and relaxation times in work measurement
BS 4220	Tests for a seat intended for a nominated tractor model; provides for measurement of transmitted vertical vibration on artificial track.
BS 4675-2	Mechanical vibration in rotating machinery. Requirements for instruments for measuring vibration severity (ISO 2954)
BS 4999-142	General requirements for rotating electrical machines. Specification for mechanical performance: vibration
BS 5000-3	Specifies generators with outputs greater than 0.75 kW or kVA per 100 r/min, matched to characteristics of internal combustion engines. Torsional and linear vibrational withstand levels are specified
BS 5228-1	Noise and vibration control on construction and open sites. Part 1: Code of practice for basic information and procedures for noise and vibration control
BS 5228-2	Part 2: Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance
BS 5228-3	Part 3: Code of practice applicable to surface coal extraction by opencast methods
BS 5228-4	Part 4: Code of practice for noise and vibration control applicable to piling operations
BS 5228-5	Part 5: Code of practice applicable to surface mineral extraction (except coal) sites
BS 6140-2	Test equipment for generating vibration. Methods of describing characteristics of auxiliary tables for test equipment for generating vibration (ISO 6070)
BS 6414	Method for specifying characteristics of vibration and shock isolators (ISO 2017)
BS 6472	Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)
BS 6611	Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS 6632	Method for measurement and reporting of shipboard vibration data (ISO 4867)
BS 6633	Method for measurement and reporting of local vibration data of ship structures and equipment (ISO 4868)
BS 6794	Method for reporting measured vibration data for land vehicles (ISO 8002)
BS 6841	Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS 6861-1	Mechanical vibration. Balance quality requirements of rigid rotors. Part 1: Method for determination of permissible residual unbalance (ISO 1940-1)
BS 6861-2	Part 2: Balance errors (ISO 1940-2)
BS 6897	Experimental determination of mechanical mobility (ISO 7626)
BS 6916-8	Chain saws. Method of measurement of hand-transmitted vibration (ISO 7505)
BS 6955-1..22	Calibration of vibration and shock pick-ups (ISO 5347)
BS 7085	Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS 7119	Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups (ISO 8042)
BS 7385-1	Evaluation and measurement for vibration in buildings. Part 1: Guide for measurement of vibrations and evaluation of their effects on buildings (ISO 4866)
BS 7385-2	Part 2: Guide to damage levels from groundborne vibration
BS 7482-1	Instrumentation for the measurement of vibration exposure of human beings. Part 1: Specification for general requirements for instrumentation for measuring the vibration applied to human beings
BS 7482-2	Part 2: Specification for instrumentation for measuring vibration transmitted to the hand
BS 7482-3	Part 3: Specification for instrumentation for measuring vibration exposure to the whole body
BS 7527-2.6	Classification of environmental conditions. Environmental conditions appearing in nature. Earthquake vibration and shock (IEC 60721-2-6)
BS 7698-9	Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations (ISO 8528-9)
BS 7853	Mechanical vibration. Road surface profiles. Reporting of measured data (ISO 8608)
BS 7854	Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts (ISO 10816)
CR 1030-1	Hand-arm vibration - Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery
CR 1030-2	Part 2: Management measures at the workplace
CR 12349	Mechanical vibration - Guide to the health effects of vibration on the human body

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

DIN 1311-1	Mechanical vibrations, oscillation and vibration systems Part 1: Basic concepts, survey
DIN 1311-2	Part 2: Linear vibration systems with single degree of freedom
DIN 1311-3	Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom
DIN 1311-4	Part 4: Vibration; vibrating continua, waves
DIN 3979	Tooth Damage on Gear Trains; Designation, Characteristics, Causes
DIN 4150-1	Vibrations in buildings Part 1: Prediction of vibration parameters
DIN 4150-2	Part 2: Effects on persons in buildings
DIN 4150-3	Part 3: Effects on structures
DIN 4178	Construction supervision: technical building regulations; bell towers
DIN 5426-1	Rolling bearings - Rolling bearing vibration and noise Part 1: Methods for measurement of structure-borne noise
DIN 25475-2	Nuclear facilities - Operational monitoring Part 2: Vibration monitoring for early detection of changes in the vibrational behaviour of the primary coolant circuit in pressurized water reactors
DIN 30787-6	Transportation loads - Measurement and evaluation of dynamic mechanical loads Part 6: Automatic recording systems for measuring random shock while monitoring transports
DIN 31692-3	Plain bearings Part 3: Vibration monitoring
DIN 45635-8	Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements
DIN 45661	Vibration measuring instrumentation - Vocabulary
DIN 45662	Vibration measuring instrumentation - Fundamental requirements and verification
DIN 45667	Classification methods for evaluation of random vibrations
DIN 45669-1	Measurement of vibration immission Part 1: Vibration meters; requirements, verification
DIN 45669-2	Part 2: Measuring method
DIN 45669-3	Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ (draft standard)
DIN 45671-1	Measurement of exposure to occupational vibration Part 1: Vibration meters; Requirements, testing
DIN 45671-2	Part 2: replaced by ISO 5349-2
DIN 45671-3	Part 3: Test (calibration and assessment) of the vibration meter; primary test, verification, intermediate test, check in situ
DIN 45672-1	Vibration measurement associated with railway traffic systems Part 1: Measuring method
DIN 45672-2	Part 2: Evaluation method
DIN 45673-1	Mechanical vibration - Resilient elements used in railway tracks Part 1: Laboratory determination of static and dynamic characteristics
DIN 45673-2	Part 2: Determination of static and dynamic characteristics in the track under operation
DIN 45675-2	Exposure to mechanical vibration transmitted to the hand-arm system Part 2: Measurement of vibration induced by portable chain saws
DIN 45675-3	Part 3: Measurement of vibration induced by portable, internal combustion engine brush saws
DIN 45678	Mechanical vibration - Articulated trucks - Laboratory method for evaluating vehicle seat vibration
DIN 45679	Mechanical vibration - Measurement and evaluation of the grip and feed forces for assessing the exposure of the hand-arm system to vibration
DIN 45694	Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration based on information provided by manufacturers of machinery (draft standard)
DIN 45695	Hand-arm vibration - Guidelines for vibration hazards reduction - Engineering and management measures (CR 1030-1 and CR 1030-2)
DIN 50100	Testing of Materials; Continuous Vibration Test; Definitions, Symbols, Procedure, Evaluation
DIN 52210	Testing of acoustics in buildings; airborne impact and sound insulation
DIN 70003	Vibrational stress; measurement of parameters on vehicle parts
D5112-98	Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
D3580-95	Standard Test Methods for vibration (Vertical Linear Motion) Test of Products
EN 1032	Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
EN 1033	Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General
EN 1299	Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
EN 12096	Mechanical vibration - Declaration and verification of vibration emission
DIN EN 12786	Safety of machinery - Guidance for the drafting of vibration clauses of safety standards
EN 13059	Safety of industrial trucks - Test methods for measuring vibration
EN 13490	Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
EN 14253	Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
EN 28662-1	Hand-held portable power tools - Measurement of vibrations at the handle Part 1: General (ISO 8662-1)
EN 28662-2	Part 2: Chipping hammers and riveting hammers (ISO 8662-2)
EN 28662-3	Part 3: Rock drills and rotary hammers (ISO 8662-3)
EN 28662-5	Part 5: Pavement breakers and hammers for construction work (ISO 8662-5)
EN 30326-1	Mechanical vibration - Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements (ISO 10326-1)
EN 60034-14	Rotating electrical machines - Part 14 : Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
EN 60745	Hand-held motor-operated electric tools - Safety Part 1: General requirements Part 2-1: Particular requirements for drills and impact tools Part 2-2: Particular requirements for screwdrivers and impact wrenches Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Part 2-4: Particular requirements for sanders and polishers other than disk type Part 2-5: Particular requirements for circular saws Part 2-6: Particular requirements for hammers Part 2-7: Particular requirements for spray guns Part 2-8: Particular requirements for sheet metal shears and nibblers Part 2-9: Particular requirements for tappers Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Part 2-12: Particular requirements for concrete vibrators Part 2-13: Particular requirements for chain saws Part 2-14: Particular requirements for planers Part 2-15: Particular requirements for hedge trimmers Part 2-16: Particular requirements for tackers Part 2-17: Particular requirements for routers Part 2-18: Particular requirements of strapping tools Part 2-19: Particular requirements for jointers Part 2-20: Particular requirements for band saws Part 2-21: Particular requirements for drain cleaners
EN 60994	Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
EN 61959	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
ENV 25349	Mechanical vibration - Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration (ISO 5349)
ENV 28041	Human response to vibration - Measuring instrumentation (ISO 8041)
E90-E350	Methods for the calibration of vibration and shock pick-ups
FD E90-694	Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system.

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

GB 10068-2000	Mechanical vibration of certain machines with shaft heights 56 mm and higher--Measurement, evaluation and limits of vibration
GB 10070	Standard of environmental vibration in urban area
GB 10434	Hygienic standard for hand-transmitted vibration in the work environment
GB 4869	Diagnostic criteria and principles of management of occupational vibration disease
GB/T 10071	Measurement method of environmental vibration of urban area
GB/T 10084	Vibration and shock--methods for analysis and presentation of data
GB/T 10283	Portable pneumatic extinguishers--Measurement of hand-transmitted vibration
GB/T 10397	Small and medium power engines-Evaluation of vibration
GB/T 10593.3	Methods of measuring environmental parameters for electric and electronic products--Treatment and induction for the vibration data
GB/T 10895	Centrifuge and separator-Measurement method of mechanical vibration
GB/T 10910	Agricultural wheeled tractors and fieled machinery-Measurement of whole-body vibration of the operator
GB/T 11287	Electrical relays--Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment
GB/T 11348.1	Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
GB/T 11348.2	Part 2: Large land-based steam turbine generator sets
GB/T 11348.3	Part 3: Coupled industrial machines
GB/T 11348.4	Part 4: Gas turbine sets
GB/T 11348.5	Part 5: Machine sets in hydraulic power generating and pumping plants
GB/T 11706	Measurement method of vibration for marine engine room auxiliaries
GB/T 13364	Measurement of mechanical vibration for reciprocating pump
GB/T 13436	Technical requirements for torsional vibration measuring instruments
GB/T 13441	Specification for measurement of human exposure to whole-body vibration environment
GB/T 13442	Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration
GB/T 13670	Mechanical vibration--Measurement and analysis of vibration to which passengers and crew are exposed in railway vehicles
GB/T 13823.1	Methods for the calibration of vibration and shock pick-ups Part 1: Basic concepts
GB/T 13823.2	Part 2: Primary vibration calibration by laser interferometry
GB/T 13823.3	Part 3: Comparison(secondary vibration)calibration by sinusoidal excitation
GB/T 13823.4	Part 4: Testing of magnetic field sensitivity
GB/T 13823.5	Part 5: Testing of mounting torque sensitivity
GB/T 13823.6	Part 6: Testing of base strain sensitivity
GB/T 13823.7	Part 7: Primary vibration calibration by comparison of phase angles
GB/T 13823.8	Part 8: Testing of transverse vibration sensitivity
GB/T 13823.9	Part 9: Testing of transverse shock sensitivity
GB/T 13823.10	Part 10: Methods for the calibration of vibration and shock pick-ups--Secondary shock calibration
GB/T 13823.11	Part 11: Primary vibration calibration by laser interferometry at low frequencies
GB/T 13823.12	Part 12: Resonance frequency testing of undamped accelerometers on a steel block
GB/T 13823.13	Part 13: Primary shock calibration by light cutting
GB/T 13823.14	Part 14: Primary calibration by centrifuge
GB/T 13823.15	Part 15: Testing of transient temperature sensitivity
GB/T 13823.16	Part 16: Testing of temperature response by comparison
GB/T 13823.17	Part 17: Testing of acoustic sensitivity
GB/T 13823.18	Part 18: Primary vibration calibration by reciprocity method
GB/T 13824	Requirements for instruments for measuring vibration severity
GB/T 13860	Mechanical vibrations--Land vehicles-Method for reporting measured data
GB/T 13866	Shock and vibration measurements--Characteristics to be specified for seismic pick-ups
GB/T 13876	Evaluation criteria of whole body vibration of the operator
GB/T 14124	Mechanical vibration and shock--Measurement and evaluation of vibration effects on buildings--Guidelines for the use of basic standard methods
GB/T 14125	Vibration and shock sensitive equipment--Methods of measurement and reporting data of vibration and shock effects in buildings
GB/T 14179	Brush saws--Measurements of hand-transmitted vibration
GB/T 14412	Mechanical vibration and shock--Mechanical mounting of accelerometers
GB/T 14696	Code for the measurement of ship vibration
GB/T 14697	Code for the measurement of local vibration of ship
GB/T 14790	Methods for the measurement and the assessment of human exposure to hand-transmitted vibration
GB/T 15619	Terminology for human exposure to mechanical vibration and shock
GB/T 16301	Evaluation of vibration severity for marine engine-room auxiliaries
GB/T 16440	Vibration and shock--Mechanical driving point impedance of the human body
GB/T 16441	Vibration and shock--Mechanical transmissibility of the human body in the z direction
GB/T 16539	Determination of sound power levels of noise sources using vibration velocity--Measurement for seal machinery
GB/T 16768	Metal-cutting machine tools--Measurement method for vibration
GB/T 16908	Mechanical vibration--Balancing--Shaft and fitment key convention
GB/T 17046	Vibratory rollers Parts The evaluation to exposure mechanical vibration
GB/T 17189	Code for field measurement of vibrations and pulsations in hydraulic machines
GB/T 17958	Requirements for vibration hazards reduction of hand-held machines at the workplace
GB/T 18051	Tests of electric submersible pump system vibration
GB/T 18368	Comfort evaluation of human exposure to whole-body vibration in recumbent position
GB/T 18703	Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
GB/T 18707.1	Mechanical vibration--Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements
GB/T 2298	Mechanical vibration and shock-Terminology
GB/T 2414.1	Test methods for the properties of piezoelectric ceramics Part 1: Radial extension vibration mode for disk
GB/T 2414.2	Part 2: Transverse length extension vibration mode for bar
GB/T 2423.10	Environmental testing for electric and electronic products--Part 2: Test methods Part 10: Test Fc and guidance: Vibration (Sinusoidal)
GB/T 2423.11	Part 11: Test Fd: Random vibration wide band
GB/T 2423.12	Part 12: Test Fda: Random vibration wide band--Reproducibility high
GB/T 2423.14	Part 14: Test Fdc: Random vibration wide band--Reproducibility low
GB/T 2423.42	Part 42: Combined low temperature/low air pressure / vibration (sinusoidal) test
GB/T 2423.43	Part 43: Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca)
GB/T 2423.47	Part 47: Test Fg: Vibration, acoustically induced
GB/T 2423.48	Part 48: Test Ff:Vibration--Time-history method
GB/T 2423.49	Part 49: Test Fe: Vibration--sine-beat method
GB/T 3389.4	Test methods for the properties of piezoelectric ceramics Part 4: Longitudinal length extension vibration mode for rod
GB/T 3389.5	Part 5: Thickness extension vibration mode for disk
GB/T 3389.6	Part 6 Thickness-shear vibration mode for rectangular plate
GB/T 4451	Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument
GB/T 4857.10	Packaging--Transport packages--Sinusoidal vibration test method using a variable vibration frequency
GB/T 4857.7	Packaging--Transport packages--Sinusoidal vibration test method at constant frequency
GB/T 5170.13	Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Mechanical vibrating type machines for vibration (sinusoidal ) test
GB/T 5170.15	Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Hydraulic vibrating type machines for vibration
GB/T 5395	Portable chain saws-Measurement of hand-transmitted vibration
GB/T 5913	Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site
GB/T 6444	Mechanical vibration--Balancing vocabulary
GB/T 6587.4	Vibration tests for electronic measuring instruments
GB/T 7031	Vehicle vibration--Describing method for road surface irregularity
GB/T 7183	Evaluation of mechanical vibration severity of machines and equipments in electric locomotives
GB/T 7184	Measurement method of vibration for small and medium power diesel engines
GB/T 7452.1	Guidelines for the overall evaluation of vibration in merchant ships
GB/T 7452.2	Guidelines for the overall evaluation of vibration in merchant ships under 100m
GB/T 7453	Measurement of ship vibration
GB/T 8543	Determination of mechanical vibrations of gear units during acceptance testing

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

IEC 60034-14	Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
IEC 60068-2-..	Environmental testing Part 2-..: Methods of test
IEC 60068-3-8	Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
IEC 60255-21	Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment
IEC 60512-6-4	Electromechanical components for electronic equipment - Basic testing procedures and measuring methods Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
IEC 60512-6-5	Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration
IEC 60721-2-6	Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
IEC 60745	Hand-held motor-operated electric tools - Safety
IEC 60749-12	Semiconductor devices - Mechanical and climatic test methods Part 12: Vibration, variable frequency
IEC 60994	Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
IEC 61300-2-1	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-1: Tests - Vibration (sinusoidal)
IEC 61373	Railway applications. Rolling stock equipment. Shock and vibration tests
IEC 61502	Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

ISO 140	Acoustics -- Measurement of sound insulation in buildings and of building elements
ISO 1925	Mechanical vibration - Balancing - Vocabulary
ISO 1940-1	Mechanical vibration – Balance quality requirements of rigid rotors Part 1: Determination of permissible residual unbalance
ISO 1940-2	Teil 2: Balance errors
ISO 2017	Method for specifying characteristics of vibration and shock isolators
ISO 2041	Vibration and shock – Vocabulary
ISO 2247	Packaging -- Complete, filled transport packages and unit loads -- Vibration tests at fixed low frequency
ISO 2371	Field balancing equipment – Description and evaluation (withdrawn)
ISO 2372	Mechanical vibration of machines with operating speeds from 10 to 200 rev/s – Basis for specifying evaluation standards (withdrawn, replaced by ISO 10816-1)
ISO 2373	Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm -- Measurement and evaluation of the vibration severity (withdrawn)
ISO 2631-1	Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration Part 1: General requirements
ISO 2631-2	Part 2: Vibration in buildings (1 Hz to 80 Hz)
ISO 2631-4	Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
ISO 2631-5	Part 5: Method for evaluation of vibration containing multiple shocks
ISO 2671	Environmental tests for aircraft equipment Part 3.4 : Acoustic vibration
ISO 2953	Balancing machines – Description and evaluation
ISO 2954	Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
ISO 3046-5	Reciprocating internal combustion engines -- Performance Part 5: Torsional vibrations
ISO 3945	Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s – Measurement and evaluation of vibration severity in situ (withdrawn, replaced by ISO 10816)
ISO 4866	Evaluation and measurement for vibration in buildings. Guide for measurement of vibrations and evaluation of their effects on buildings
ISO 4867	Method for measurement and reporting of shipboard vibration data
ISO 4868	Method for measurement and reporting of local vibration data of ship structures and equipment
ISO 5007	Agricultural wheeled tractors. Operator's seat. Laboratory measurement of transmitted vibration
ISO 5008	Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator
ISO 5344	Electrodynamic vibration generating systems - Performance characteristics
ISO 5347-4	Methods for the calibration of vibration and shock pick-ups Part 4: Secondary shock calibration
ISO 5347-5	Part 5: Calibration by Earth's gravitation
ISO 5347-6	Part 6: Primary vibration calibration at low frequencies
ISO 5347-7	Part 7: Primary calibration by centrifuge
ISO 5347-8	Part 8: Primary calibration by dual centrifuge
ISO 5347-10	Part 10: Primary calibration by high impact shocks
ISO 5347-11	Part 11: Testing of transverse vibration sensitivity
ISO 5347-12	Part 12: Testing of transverse shock sensitivity
ISO 5347-13	Part 13: Testing of base strain sensitivity
ISO 5347-14	Part 14: Resonance frequency testing of undamped accelerometers on a steel block
ISO 5347-15	Part 15: Testing of acoustic sensitivity
ISO 5347-16	Part 16: Testing of mounting torque sensitivity
ISO 5347-17	Part 17: Testing of fixed temperature sensitivity
ISO 5347-18	Part 18: Testing of transient temperature sensitivity
ISO 5347-19	Part 19: Testing of magnetic field sensitivityr
ISO 5347-22	Part 22: Accelerometer resonance testing -- General methods
ISO 5348	Mechanical vibration and shock – Mechanical mounting of accelerometers
ISO 5349-1	Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
ISO 5349-2	Part 2: Practical guidance for measurement at the workplace
ISO 5805	Mechanical vibration and shock affecting man – Vocabulary
ISO 5982	Mechanical vibration and shock -- Range of idealized values to characterize seated-body biodynamic response under vertical vibration
ISO 6070	Auxiliary tables for vibration generators – Methods of describing equipment characteristics
ISO 6721	Determination of dynamic mechanical properties
ISO 6897	Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
ISO 6954	Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
ISO 7096	Earth-moving machinery. Laboratory evaluation of operator seat vibration
ISO 7505	Forestry machinery -- Chain saws -- Measurement of hand-transmitted vibration
ISO 7626-1	Vibration and shock – Experimental determination of mechanical mobility Part 1 : Basic definitions and transducers
ISO 7626-2	Part 2: Measurements using single-point translation excitation with an attached vibration exciter
ISO 7626-5	Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO/TR 7849	Acoustics -- Estimation of airborne noise emitted by machinery using vibration measurement
ISO 7916	Forestry machinery -- Portable brush-saws -- Measurement of hand-transmitted vibration
ISO 7919-1	Mechanical vibration of non-reciprocating machines -Measurements on rotating shafts and evaluation Part 1: General guidelines
ISO 7919-2	Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
ISO 7919-3	Part 3: Coupled industrial machines
ISO 7919-4	Part 4: Gas turbine sets
ISO 7919-5	Part 5: Machine sets in hydraulic power generating and pumping plants
ISO 8002	Method for reporting measured vibration data for land vehicles
ISO 8041	Human response to vibration. Measuring instrumentation
ISO 8042	Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
ISO 8313	Packaging -- Complete, filled transport packages and unit loads -- Sinusoidal vibration tests using a variable frequency
ISO 8568	Mechanical shock – Testing machines - Characteristics and performance
ISO 8569	Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
ISO 8528-9	Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations
ISO 8579-2	Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing
ISO 8608	Mechanical vibration -- Road surface profiles -- Reporting of measured data
ISO 8626	Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
ISO 8662-1	Hand-held portable power tools -- Measurement of vibrations at the handle Part 1: General
ISO 8662-2	Part 2: Chipping hammers and riveting hammers
ISO 8662-3	Part 3: Rock drills and rotary hammers
ISO 8662-4	Part 4: Grinders
ISO 8662-5	Part 5: Pavement breakers and hammers for construction work
ISO 8662-6	Part 6: Impact drills
ISO 8662-7	Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
ISO 8662-8	Part 8: Polishers and rotary, orbital and random orbital sanders
ISO 8662-9	Part 9: Rammers
ISO 8662-10	Part 10: Nibblers and shears
ISO 8662-11	Part 11: Fastener driving tools
ISO 8662-12	Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action
ISO 8662-13	Part 13: Die grinders
ISO 8662-14	Part 14: Stone-working tools and needle scalers
ISO 8727	Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems
ISO 8821	Mechanical vibration – Balancing – Shaft and fitment key convention
ISO 9688	Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
ISO 9996	Mechanical vibration and shock -- Disturbance to human activity and performance -- Classification
ISO 10055	Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components
ISO 10056	Mechanical vibration. Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles
ISO 10068	Mechanical vibration and shock -- Free, mechanical impedance of the human hand-arm system at the driving point
ISO 10326-1	Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements
ISO 10326-2	Part 2: Application to railway vehicles
ISO/TS 10811-1	Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment Part 1: Measurement and evaluation
ISO/TS 10811-2	Part 2: Classification
ISO 10813-1	Vibration generating machines -- Guidance for selection Part 1: Equipment for environmental testing
ISO 10813-3	Part 3: Equipment to be used in a shock mode (draft standard)
ISO 10814	Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance
ISO 10815	Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
ISO 10816-1	Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
ISO 10816-2	Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
ISO 10816-3	Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
ISO 10816-4	Part 4: Gas turbine driven sets excluding aircraft derivatives
ISO 10816-5	Part 5: Machine sets in hydraulic power generating and pumping plants (available in English only)
ISO 10816-6	Part 6: Reciprocating machines with power ratings above 100 kW
ISO 10817-1	Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration
ISO 10819	Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
ISO 10846-1	Acoustics and vibration -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 1: Principles and guidelines
ISO 10846-2	Part 2: Dynamic stiffness of elastic supports for translatory motion -- Direct method
ISO 10846-3	Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 10846-4	Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
ISO 11342	Mechanical vibration -- Methods and criteria for the mechanical balancing of flexible rotors
ISO 13090-1	Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people Part 1: Exposure to whole-body mechanical vibration and repeated shock
ISO 13091-1	Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips
ISO 13091-2	Part 2: Analysis and interpretation of measurements at the fingertips
ISO 13332	Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
ISO 13350	Industrial fans -- Performance testing of jet fans
ISO 13355	Packaging. Complete, filled transport packages and unit loads. Vertical random vibration test
ISO 13373-1	Condition monitoring and diagnostics of machines. Vibration condition monitoring. Part 1: General procedures
ISO 13374	Condition monitoring and diagnostics of machines - Data processing, communication and presentation
ISO 13379	Condition monitoring and diagnostics of machines - General guidelines on data interpretation and diagnostics techniques
ISO 13753	Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
ISO 14694	Industrial fans -- Specifications for balance quality and vibration levels
ISO 14695	Fans for general purposes. Method of measurement of fan vibration
ISO 14839-1	Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary
ISO 14839-2	Part 2: Evaluation of vibration
ISO 14963	Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts
ISO 14964	Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
ISO 15242-1	Rolling bearings -- Measuring methods for vibration measurement Part 1: Fundamentals
ISO 15242-2	Part 2: Radial ball bearings with cylindrical bore and outside surface
ISO 15242-3	Part 3: Radial double-row spherical and tapered roller bearings with cylindrical bore and outside surface
ISO 15243	Rolling bearings -- Damage and failures -- Terms, characteristics and causes
ISO/TS 15694	Mechanical vibration and shock -- Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system
ISO 16063-1	Methods for the calibration of vibration and shock transducers Part 1: Basic concepts
ISO 16063-11	Part 11: Primary vibration calibration by laser interferometry
ISO 16063-12	Part 12: Primary vibration calibration by the reciprocity method
ISO 16063-13	Part 13: Primary shock calibration using laser interferometry
ISO 16063-21	Part 21: Vibration calibration by comparison with a reference transducer
ISO 16063-22	Part 22: Shock calibration by comparison with a reference transducer (replacement for ISO 5347-4)
ISO 18436-1	Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel Part 1: Requirements for certifying bodies and the certification process
ISO 18436-2	Part 2: Vibration condition monitoring and diagnostics
ISO 18649	Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges
ISO 20643	Mechanical vibration -- Hand-held and hand-guided machinery -- Principles for evaluation of vibration emission
ISO 22867	Forestry machinery -- Vibration test code for portable hand-held machines with internal combustion engine -- Vibration at the handles

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

JIS B 0906	Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- General guidelines
JIS B 0907	Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity
JIS B 0910	Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria
JIS B 0911	Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance
JIS B 1754	Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing
JIS C 1510	Vibration level meters
JIS C 1512	Level recorders for recording sound level and/or vibration level
JIS D 1601	Vibration testing methods for automobile parts
JIS E 3014	Parts for railway signal -Vibration test methods
JIS E 4023	Vibration characteristics of railway rolling stock -- Measuring methods
JIS E 4031	Railway rolling stock parts -- Test methods for vibration
JIS Z 0232	Packaged freights -- Method of vibration test
JIS Z 8735	Methods of measurement for vibration level

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

MIL-A-8870C	Airplane Strength and Rigidity Vibration, Flutter, and Divergence
MIL-STD-167	Mechanical Vibrations On Ship Board Systems
MIL-STD-167/1	Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited)
MIL-STD-167/2	Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V
MIL-STD-202G	Test Method 201A: Vibration
MIL-STD-202G	Test Method 204D: Vibration, High Frequency
MIL-STD-202G	Test Method 214A: Random Vibration
MIL-STD-810F	Test Method Standard For Environmental Engineering
NEMA MG1	Assists users in the proper selection and application of motors and generators.
PD 6585-2	Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace
UIC 513	Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles
UNI 9916	Criteria for the measurements of vibrations and the assessment of their effects on buildings
UNI 9942	Methods for measurement of vibrations generated internally of railways tunnels

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

VDI 2056	Evaluation of mechanical vibrations of rotating machinery (withdrawn); replacement: ISO 10816
VDI 2057-1	Human exposure to mechanical vibrations Part 1: Whole-body vibration
VDI 2057-2	Part 2: Hand-arm vibration
VDI 2057-3	Part 3: Assessment (withdrawn)
VDI 2057-4.1	Part 4.1: Measurements and assessment for workshop places in buildings
VDI 2057-4.2	Part 4.2: Measurement and evaluation for workshop places on vehicles (withdrawn)
VDI 2057-4.3	Part 4.3: Measurements and assessment for ships and floating vessels (withdrawn); replacement: ISO 6954
VDI 2059-1	Shaft vibrations of turbosets; principles for measurement and evaluation
VDI 2059-3	Shaft vibrations of industrial turbosets; measurement and evaluation
VDI 2059-4	Shaft vibrations of gas turbosets; measurement and evaluation
VDI 2059-5	Shaft vibrations of gas turbosets; measurement and evaluation
VDI 2062	Shock and vibration isolation Part 1: Conceptions and principles Part 2: Isolation elements, materials and component parts of isolation
VDI 2063	Measurement and evaluation of mechanical vibrations of reciprocating piston engines and piston compressors (withdrawn); replacement: VDI 3838
VDI 2064	Active vibration isolation
VDI 2149	Transmission dynamics; elastic mechanisms
VDI 3832	Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of state condition
VDI 3836	Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers
VDI 3837	Groundborne vibration arising from rail systems at grade - Spectral prediction method
VDI 3838	Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW - Addition to ISO 10816-6
VDI 3839-1	Instructions on measuring and interpreting the vibrations of machines Part 1: General principals
VDI 3839-2	Part 2: Vibration patterns for excitation arising from unbalance, incorrect assembly, bearing faults and damage to rotating components
VDI 3839-4	Part 4: Typical vibration patterns with fans (draft)
VDI 3839-5	Part 5: Typical vibration patterns with electrical machines
VDI 3839-8	Part 8: Typical vibration patterns with reciprocating machines
VDI 3840	Vibration analysis for machine sets
VDI 3841	Vibration monitoring of rotating machinery - necessary measurement
VDI 3842	Vibrations in piping systems

ANSI AS BS DIN EN GB (China) IEC ISO JIS MIL VDI Back to top

Copyright (C) 2008 Metra Mess- und Frequenztechnik, edited by IDS Innomic.
Publication allowed, if we are named as source and a short information about the publication purpose
was sent to us.